KryoFlux Imaging Machine
So putting one last push to actually get something done.
Got the machine i'm going to use for parts to make my KryoFlux imaging system.
The idea is that I have a single machine for taking images of floppy disks so that I can start on the task of imaging the large quantity of Acorn software that I have in my collection.
The machine will have both 3.5 and 5.25 inch floppy disk drives and will copy all images to my NAS storage or USB.
I will initially RDP to the machine to take images of floppy disks using the KryoFlux software but when I have the time I want to create a remote front end so that all I need to do is insert the disk and it will image and create the appropriately named files.
So that I am keeping the full copy of the disk I will store both the KryoFlux raw data and a image suitable for use with emulators. Any disks that are copy protected can then be re-written using the KryoFlux raw data.
The donor machine is an intel Core 2 duo PC, this used to be my main machine back a long time ago and has now just been in storage doing nothing.
Due to the case being a full tower one I want to move the motherboard to a new desktop case that will fit under my desk out of the way.
The machine had a pretty good graphics card at the time but this is now pretty obsolete compared even to a lot of embedded chipset graphics processors.
Extracted the motherboard.
Assembling The New Machine
To get the board into the new machine I had to remove the extra funnel for the processor fan and take out the filter that is fitted to the new case as the fan goes right out to the case lid.
Had a spare internal SSD with adapter kicking around from another project.
Fitted the KryoFlux into this space, will fit it properly but need some longer floppy drive cables and more power for the 5.25 inch drive.
The KryoFlux needs to be plugged into the USB, I may rob a USB front panel from a case to use internally.
All assembled in the case.
The 2 floppy drives for archiving.
Things To Do
Need to sort out the floppy cable and either make one the correct length or get one of the nice round ones I have in storage. Not sure if I have one with a 5.25 inch drive flat connector.
Currently installing the operating system so that I can actually image disks.
OS is now installed and I can remote desktop to the machine so that I don't need it connected to a monitor to use.
Fix the KryoFlux in properly (I have some PCB stands somewhere) and fit an internal USB to the machine so I can connect the KryoFlux without any external cabling.
This now has an internal USB header on the board which connects to the Kryoflux.
Image all of my disks (this may take a while).
Started this but its going to take a fair bit of time.
Goodbye Retro Challenge...
So this is the end again for another Retro Challenge, as has been common in the last few challenges my 11 month old has got in the way so I've not really got a lot done.
I am happy that I've manage to do some of what I set out to do. Mainly sorting my storage locker so that I can easily access machines and other stuff so that I can start to clean and fix them one at a time.
Enjoyed looking at everyone's blogs and hope to see you all next time.